INTRODUCTION
Using an autologous tissue is an ideal option to cover a soft tissue defects due to various reasons, particularly trauma, congenital anomalies, or infections. However, covering with autologous tissue alone is limited because of its donor site morbidities and the lack of substantial quantities to harvest. Therefore, it is artificial dermal substitutes are also considered [
1].
Cultured epidermal autograft, porous collagen and glycosaminoglycan matrix, and polyglycolic acid meshes were invented to cover the full-thickness skin loss by infection, burn wounds, frostbite, and trauma. However, the limitation of these options is that they are unstable and can induce immune reactions. To address this problem, allogenic acellular human dermis was invented, and reports are available demonstrating that it is stable and shows no immune reactions [
2].
After an appropriate solvent and detergent process to eliminate cellular components, the next step is the freezing-drying process to obtain these acellular dermal matrix grafts (i.e., Megaderm) from human cadaver skin, which includes extracellular matrix and basement membrane complex and involves the removal of cellular components and epidermis [
3].
In addition, it is also known that, when acellular dermal matrix is applied to the human body, it should be overcorrected because of the decrement of the initial volume by the tendency of absorption itself (
Table 1). However, previous research on the exact reduced volumes of acellular dermal matrix and the corresponding absorption rates with time is scarce. Therefore, in the present study, we designed an experiment to find out the absorption rates of human acellular dermal matrix (Megaderm; L&C BIO Inc., Seongnam, Korea) which is now on sale in South Korea.
METHODS
Materials
Nine mice were used (male and female; weight, 30±5 g). The mice were kept under routine laboratory conditions with unrestricted access to food and water. The animals were kept in separate cages. Thereafter, the mice were randomly divided into three groups. Each group had been sacrificed at postoperative 4 weeks, 8 weeks, 12 weeks, respectively, to figure out implant (acellular dermal matrix) absorption rates. Megaderm (L&C BIO Inc.) was used in all groups of nine animals.
Surgical procedure
Mice (n=9) were anesthetized using the Sevoflurane (Baxter International Inc., Deerfield, IL, USA). After shaving the anterior chest of animals, routine surgical preparation was performed with 10% Potadine iodine solution. A skin incision of about 1.5 cm was made with blade #15 scalpel with exposing the Pectoralis major muscle with dissected with a blunt scissor. As hydrated Megaderm was located upon the pectoralis major muscle, the skin was sutured with Ethilon #5-0 without subcutaneous suture. Postoperative dressing was performed with Potadine iodine solution and Fucidin (Leo Pharma, Ballerup, Denmark) ointment. The operation site was opened to observe any infection signs. A parenteral antibiotics was not administered for preventing postoperative infections. After the surgical procedure, each animal group was sacrificed at 4 weeks, 8 weeks, and 12 weeks, respectively, for biopsies and histological analysis of the implants. All samples were stained with routine hematoxylin and eosin staining to measure the thickness of implants; Masson’s trichrome staining was used to evaluate collagenous changes of implants.
Measurement of thickness
The implant (Megaderm) was not applied a unit of the whole product for each mice but was divided and tailored to fit a cuboid form (1.0 cm×1.0 cm in length and width and 2.0 mm in thickness). Before hydration, the implants (Megaderm) were measured regarding their length, width, and thickness for 4 spots (12, 3, 6, and 9 o’clock) with a caliper ruler. For hydration, the implants (Megaderm) were incubated in normal saline solution at room temperature for 10 minutes. After hydration, the implants were measured again as described above and the average thickness was computed.
Statistical analysis
For each group, the thicknesses of Megaderm before and after implantation with time were determined as mean and standard deviation. The Friedman test was used to figure out whether significant differences were present between the groups. The statistical analysis program IBM SPSS ver. 22.0 (IBM Corp., Armonk, NY, USA) was used. A p-value of <0.05 was considered to be statistically significant.
DISCUSSION
The dermis layer consists of collagen fiber and extracellular matrix. It contributes to stability and elasticity of the skin layer. For centuries, there have been numerous attempts to hide soft tissue defects caused by numerous factors, particularly trauma or congenital anomalies. Full-thickness and split thickness skin grafts were workhorse for these attempts. Nicolle et al [
8]. used the autologous dermis graft for facial wrinkle correction. However, covering the defects with the autologous tissue alone has limitations, due to its donor site morbidity and lack of its quantities to harvest. Donor site morbidity and lack of sufficient quantities to harvest are the limitations of using autologous tissue coverage. In addition to autologous tissue, various dermal substitutes were invented to cover the full-thickness skin loss by infection, burn wounds, frostbite, and trauma. However, the limitation of these options is that they are unstable and can induce immune reactions. To address this problem, allogenic acellular human dermis was invented, and reports are available demonstrating that it is stable and shows no immune reactions [
2]. In 1995, Wainwright [
9] was the first describe an acellular dermal matrix for the reconstruction of full-thickness burn wound with a split-thickness skin graft. The author noted that there were no immune reactions and a good cosmetic and functional result was obtained. Afterwards, an acellular dermal matrix has been widely used for breast reconstruction, contour irregularity corrections, and hernia repair. In cosmetic surgery, it is used for augmentation rhinoplasty, nasal irregularity correction, and secondary rhinoplasty [
10-
13].
Compared to conventional autologous full- or split-thickness skin grafts, a split thickness skin graft with acellular dermal matrix is reported to yield better cosmetic and functional results, as it can reduce the donor and graft site scar formation [
14-
16]. However, the complications of acellular dermal matrix include cellulitis, implant failure, seroma formation, wound dehiscence, and wound infection [
17]. For the diverse usage of acellular dermal matrix, Flex HD (Ethicon), DermaMatrix (Synthes), AlloMax (Bard Davol), and SurgiMend (TEI Biosciences) were invented following Alloderm (LifeCell Corp.)
In previous studies, cosmetic and functional superiority of acellular dermal matrix was consistently demonstrated in previous research. However, most of these studies used Alloderm (LifeCell Corp.), so that research on acellular dermal matrix except for Alloderm (LifeCell Corp.) remains scarce.
Physicians tend to overcorrect when applying the acellular dermal matrix for reconstructive option because of volume decrement problem after absorption comparing with initial volume. However, there are no studies on the exact volume decrement and absorption rate with commercial products in South Korea. Therefore, in the present study, we designed an experiment to find out the exact absorption rate and volume decrement [
4].
Wainwright [
9] and Wainwright et al. [
18] reported that fibroblast development and neovascularization started in acellular dermal matrix at 7 days after implantation. In 14 days after implantation, engraftment was made at the basement membrane complex with infiltration of fibroblast and the in-setting procedure.
Furthermore, Lee et al. [
19] reported that implanted acellular dermal matrix was totally absorbed at 4 weeks after graft implantation. However, in general clinical practice, acellular dermal matrix of the thickness above 1 mm is usually used. However, the results of this experiment at 4 weeks after operation were far from total graft take. We assumed that difference of the result was contributed to the implant thickness.
In addition, Kim et al. [
4] reported that the thickness of implanted acellular dermal matrix is inversely proportional with the absorption time by neovascularization, collagenous fiber formation, and replacement of autologous tissue. It was also observed that collagenous fiber infiltration was highly active and replaced implanted dermal matrixes at 8 weeks after implantation.
In a study of the relation of multi-layered acellular dermal matrix between absorption, Lee et al. [
20] reported that longlasting thickness is proportional with the multiple layer structure of acellular dermal matrix. Considering the results of the two studies overviewed above, we concluded that it is variable the absorption time with depending on the thickness of implants. In this experiment, absorption thickness of Megaderm decreased and there is no statistically significance with time (p=0.368). This result is opposite to the general assumption that absorption rate of implant will increase with time. We assume that, with the flow of time, collagenous fiber became more infiltrative and conjunctive, and neovascularization was made with the framework of Megaderm as time goes by.
Na et al. [
21] reported that dermal framework of human acellular dermal matrix was maintained throughout a long period after implantation by histological analysis using optical and electron microscope. This study would be the basis of authors’ assumption. Gryskiewicz [
22] reported that there was no contour change of nasal dorsum for the dorsal graft with acellular dermal matrix in dorsal irregularity correction at 1-year follow-up study. Lee and Koh [
23] investigated the difference of acellular dermal matrix between temporoparietal fascia in the correction of the secondary cleft lip deformity. The results of this study showed that there was no statically significance between two groups with respect to volume absorption rate and autologous tissue and acellular dermal matrix. Park et al. [
6] announced that volume of Alloderm with implanted in nude mouse was steadily decreased at 12 weeks after graft. But later than 12 weeks after graft, the authors observed no volume decrement and maintained long period.
However, in a study of Alloderm graft at the postauricular area in adults, Sclafani et al. [
7] described that only 20.2% of initial volume of Alloderm was remained after 1-year follow-up. Owens and Yukna [
24] reported that most implanted Alloderm was totally absorbed at 4 months after implantation of the Alloderm with oral mucosa of dog. In histological analysis, differentiation between grafted Alloderm and around the normal tissue was difficult to find. Several authors reported that a high absorption rate was observed in lip augmentation, unlike the dorsal graft in nose contour irregularity correction, and assumed the cause was the lip motion. In this study, it is suggested that the wound bed of the bone or cartilage showed the lowest absorption of Alloderm [
25].
In this experiment, the implant insertion plane was superior surface of Pectoralis major muscle. A motional plane is the distinguishing point comparing with previous study. Authors choose this plane in order to diversify the insertion plane. By doing so, authors had wanted to know a multifarious results about short-term changes of acellular dermal matrix implantation. Because most of studies were designed with an insertion plane for immobile or easily checked up site, the result of supramuscular plane could be a novelty. These conflicting results can be related to the fact that the absorption of acellular dermal matrix could be affected by graft site, blood supply, and animals that were used in the experiment.
Because this experiment was done with mouse study only not in human and only 12 weeks follow-up, general application to human is difficult with some limitations. Also if implant insertion plane is applied with difference, it could be contributed to absorption rate. Clinically, insertion plane of implants varies from subdermis to fascia. However, in the present study, the implant was placed only on pectoralis major muscle. In our experiment, the mean absorption thickness was 5.5%. Measured with a ruler, the mean absorption caliper was 0.14 mm. We measured a thickness of implant in place of measuring a volume of implant because a carved implant was cuboidal form and length and width of extracted implant was constant. The only altered figure was thickness. In conclusion, there is no statistical significance between the absorption rate and the time (p=0.368). In clinical usage, overcorrection was not a prior consideration, because mean absorption of Megaderm was only 0.14 mm caliper. Additionally, changing an insertion plane or insertion site and following a longer period of thickness measurement will provide specific and accurate information for clinicians interested in reconstruction with acellular dermal matrix.